Skip to main content
Ceremonial Scissors Guide Search

Search

What Ceremonial Scissors Are Made Of: Metal, Plated, Wood and Plastic

Ceremonial scissors are commonly made of metal, finished metal, wood or plastic. Metal and plated pairs are more likely to have cutting blades, while wood and plastic pairs are usually display pieces. A gold or silver look can be a thin surface layer, so read the wording in the listing and ask what is under the finish.

Close-up of a polished stainless steel scissor blade and pivot screw on a neutral matte surface

Part of our guide: Ribbon Cutting Scissors: Types, Sizes and How to Choose

What a pair of ceremonial scissors is made of affects whether it cuts, how much it weighs and how it wears. This page supports our ribbon cutting scissors guide with a plain comparison of metal, plated, wood and plastic.

Solid metal, plated, wood and plastic compared

The table above sets out the pattern. Metal and finished metal are the likeliest to have working edges. Wood and plastic are for display. Within each group, quality varies, so no material guarantees a good cut. For the object itself see ceremonial scissors explained.

Blade steel versus decorative metal

A cutting edge needs a hard, well formed blade. Decorative metal is chosen for looks and may be softer. A pair can have a steel blade with decorative handles, or decorative metal throughout. Ask what the blade is made of, not just the handle.

What does gold plated mean?

The FTC Jewelry Guides address words like gold and gold plated. Their scope is jewelry and articles made from precious metals such as pens and flatware, so scissors are not necessarily covered, but the wording is a useful yardstick. In 16 CFR 23.3, using the word gold without qualification for something not composed throughout of fine 24 karat gold may be misleading, and a plated claim should be backed by a surface plating of suitable thickness and coverage.

In plain terms, a listing for “gold scissors” should tell you whether the pair is solid or has a gold finish on another metal. If it does not, ask.

Weight and durability

Metal pairs are heavier and more durable. Plated pairs can wear at the points a hand touches. Wood can chip or split, and plastic can crack. Weight matters for handling, so see how big giant scissors are and plan two people for heavy pairs.

Cleaning and tarnish basics

Use a soft dry cloth, avoid abrasive pads and strong cleaners on a thin finish, and store the pair closed and dry. More is on caring for ceremonial scissors.

Which material fits which event?

For a pair that may need to cut and will be reused, choose metal. For a showpiece keepsake, a finished metal pair suits. For decor, wood. For a prop or a photo, plastic or foam. If you are unsure whether a pair is a prop, read giant prop scissors, and if you want a name added, see engraved scissors.

Questions to ask about material

Ask what the blades are made of, not only the handles. Ask whether the finish is solid or plated, and what is under it. Ask how the pair has been tested and how it should be cleaned. Ask what weight to expect, because heavy metal pairs need two people. A seller or lender who answers these plainly is easier to trust than one who describes only the finish.

Common mistakes

  • Assuming a heavy pair has working blades.
  • Using abrasive polish on a thin plated finish.
  • Choosing a showy finish and forgetting that it will show fingerprints.
  • Storing a wooden pair in a damp place.

General information only. Follow the maker’s instructions and your venue’s rules.

Common materials for ceremonial scissors
FeatureSolid metalPlated or finished metalWoodPlastic or foam
Likely to cut?OftenOften, check the bladesRarelyNo
WeightHeavyHeavyModerateLight
LookPolished or brushedGold, silver or colored finishNatural or paintedPainted or printed
WearDurableFinish can wear at handlesCan chip or splitCan scuff or crack
Best forRepeated useA showpiece keepsakeDecor or displayProps and light use

Choose metal or finished metal for a pair that may need to cut, and wood or plastic for display. Treat any gold or silver wording as a description of the surface only.

People also ask

What are ribbon cutting scissors made of?

Most are metal, sometimes with a plated, lacquered or painted finish. Large decorative pairs may be wood or plastic. The blades, handles and finish can each be different materials, so a listing that names only the finish tells you little. Ask what the blade is made of and whether the cutting edge is real or only part of the look.

What does gold plated mean?

Gold plated means a thin surface layer of gold or gold alloy over another metal. Under the FTC Jewelry Guides, the word gold alone should not describe an item that is not composed throughout of fine gold, and plated claims should reflect reasonable coverage. Those guides cover jewelry and similar articles, so for scissors use them only as a reference point when reading a claim.

Are wooden giant scissors real cutters?

Usually not. Wooden giant scissors are normally decorative or display pieces. Wood does not hold a cutting edge the way steel does, and the blades are often a single carved shape. If you need a real cut, choose a pair that says the blades cut, or pre-cut the ribbon so the display pair completes the moment.

Do plastic giant scissors cut ribbon?

Plastic and foam giant scissors are made as props and almost never cut. Their strength is that they are light and safe to handle. For a ribbon cutting, they are best used for a photo, with the ribbon cut beforehand or finished with a separate pair of ordinary scissors.

How should I clean a plated finish?

Wipe it gently with a soft, dry cloth and avoid abrasive pads or strong cleaners, which can remove a thin surface layer. Follow the maker's care notes if they exist. Store the pair closed and dry. The care and storage page has a general routine that applies to most finishes.

Further reading

  1. eCFR: 16 CFR 23.0, scope and application (ecfr.gov)
  2. eCFR: 16 CFR 23.1, deception (general) (ecfr.gov)
  3. eCFR: 16 CFR 23.3, misrepresentation as to gold content (ecfr.gov)

Worth reading next

Return to top